The "WizardProg Mobile" (professional version application is "WizardProg Expert") application software designed to manage the programming operation for the universal portable USB-programmer TL866A/CS and other programmer models which fully compatible with it. This system is used to program a wide range of E(E)PROM chips, microcontrollers internal EEPROM, testing SRAM chips and logic chips.
The application allows you to achieve a new level of mobility and efficiency when using the programmer TL866, which is used widely to repair and adjustment:
· automotive computers, computer-unit and radio;
· personal computers;
· any other modern electronic equipment.
The "WizardProg Mobile" system is used by service technicians of electronics, amateur radio operators and developers of modern electronic devices for the purpose of:
· repair and restore the microelectronic device and firmware;
· promptly update the firmware of microelectronic devices;
· assist in the embedded electronics construction and setting up the microcontroller units;
· replicate numerous useful designs using advanced electronic components.
Main characteristics and features of the "WizardProg Mobile" microelectronic programming system are:
· Fast and reliable programming, in most cases with significantly better speed than the similar systems.
· The programmer's low power consumption when powered by USB (OTG)-cable from the mobile device battery.
· Support for a wide range of integrated circuits (ICs): the memory of a large capacity up to 128Mbit (EPROM, FLASH, EEPROM I2C/3-wire/SPI), microcontrollers PIC, Atmel-AVR, MCS-51 based SST, SyncMOS, Winbond. PLD chips, GAL.
TL866 programmer does not need an external power supply and it operates using the power sources of a tablet or mobile phone which is connected to via USB interface. Physical linking to a mobile device is provided with a USB cable fully supporting OTG (On-The-Go) protocol.
Important note! The target control tablet or mobile phone must have a fully implemented hardware support of OTG access too!
Currently "WizardProg Mobile" mobile application is completely autonomous in operation, does not need a permanent connection to the Internet, allowing you to use it even without access to communication networks.
Both of programmer's models TL866CS and TL866A(ICSP) are fully supported. The modern version of the TL866II Plus programmer currently is not supported by the "WizardProg Mobile" system!
Device list for the current application version: http://www.wizardprog.com/wp/dblist/recent_version_chiplist.htm
Il software applicativo "WizardProg Mobile" (applicazione versione professionale è "WizardProg Expert") progettato per gestire l'operazione di programmazione per il programmatore USB portatile universale TL866A / CS e altri modelli di programmatori che sono pienamente compatibili con esso. Questo sistema viene utilizzato per programmare un'ampia gamma di chip PROM E (E), EEPROM interna di microcontrollori, test di chip SRAM e chip logici.
L'applicazione consente di raggiungere un nuovo livello di mobilità ed efficienza quando si utilizza il programmatore TL866, ampiamente utilizzato per la riparazione e la regolazione:
· Computer automobilistici, unità computer e radio;
· computer personale;
· Qualsiasi altra attrezzatura elettronica moderna.
Il sistema "WizardProg Mobile" è utilizzato da tecnici dell'assistenza elettronica, radioamatori e sviluppatori di moderni dispositivi elettronici allo scopo di:
· Riparare e ripristinare il dispositivo microelettronico e il firmware;
· Aggiornare tempestivamente il firmware dei dispositivi microelettronici;
· Assistenza nella costruzione dell'elettronica integrata e nella configurazione delle unità di microcontrollore;
· Replicare numerosi progetti utili utilizzando componenti elettronici avanzati.
Le principali caratteristiche e caratteristiche del sistema di programmazione microelettronica "WizardProg Mobile" sono:
· Programmazione rapida e affidabile, nella maggior parte dei casi con una velocità significativamente migliore rispetto ai sistemi simili.
· Basso consumo energetico del programmatore quando alimentato tramite cavo USB (OTG) dalla batteria del dispositivo mobile.
· Supporto per una vasta gamma di circuiti integrati (CI): la memoria di una grande capacità fino a 128 Mbit (EPROM, FLASH, EEPROM I2C / 3-wire / SPI), microcontrollori PIC, Atmel-AVR, MCS-51 basato su SST, SyncMOS, Winbond. Chip PLD, GAL.
Il programmatore TL866 non necessita di un alimentatore esterno e funziona utilizzando le fonti di alimentazione di un tablet o di un telefono cellulare a cui è collegata tramite interfaccia USB. Il collegamento fisico a un dispositivo mobile è fornito con un cavo USB che supporta completamente il protocollo OTG (On-The-Go).
Nota importante! Anche il tablet o il telefono cellulare di controllo target devono avere un supporto hardware completamente implementato per l'accesso OTG!
Attualmente l'applicazione mobile "WizardProg Mobile" è completamente autonoma nel funzionamento, non necessita di una connessione permanente a Internet, consentendoti di utilizzarla anche senza accesso alle reti di comunicazione.
Entrambi i modelli di programmatore TL866CS e TL866A (ICSP) sono completamente supportati. La versione moderna del programmatore TL866II Plus attualmente non è supportata dal sistema "WizardProg Mobile"!
Elenco dei dispositivi per l'attuale versione dell'applicazione: http://www.wizardprog.com/wp/dblist/recent_version_chiplist.htm